Semi-Automatic Pad Labeller

Compact Labelling Systems

  • Model: Compact-A-Pad
  • Surfaces: Flat and near Flat
  • Item Code: CP-SAL-P
  • Flat containers, jar tops, oval shaped bottles
  • Bench model (20Kgs approx)
  • No problem with clear and opaque labels
  • Requires air and power (single phase)
  • 10-15 units per minute (guide only)
  • Suitable for food and pharmaceutical use
  • Quick change over of container or parts
  • Stainless steel and aluminum construction
  • Adjustable label position while running
  • Label height max 150mm
  • Applies front and back labels, in short two stop process
  • Dimensions: 360 x 720x 500mm
  • Can connect to the Datamax printer for print-apply
  • Max' Roll Diameter 300mm - 76 Core
  • Label Height Max' 150mm
  • Label Length Min 15mm - 220mm
  • Throughput up 20 per minute
  • Foot Print Dim' W330 x L600
  • Overall Dim' W360 x L720 x H500 - 35kg
  • Power Requirements 240V 10Amp
  • Gross Crate Dim' W430 x L780 x H430 - 50Kg

    Labels:
  • On a roll
  • Self adhesive
  • Die cut & weeded
  • Left hand edge leading (in most cases)
  • Front & back on same roll preferable
  • Max roll diameter: 300mm
  • Core diameters: 38mm and 76mm (pref)
  • Max height: 180mm
  • Min height: 10mm
  • Max width: 230mm
  • Min width: 20mm
  • Click link below for detailed diagram of label orientation

    Label unwind (direction) chart

    We often find that one particular labeller will not necessarily be better than another based purely on its brand, size or cost, and as such when installing a labelling solution we generally will bring several different units to make sure you get the right machine for the job, if this is not possible we normally request that a sample of your container and a roll of your labels be sent to us to run a trial, this is a free of charge service that we offer to help you make sure you get the equipment you need.
  • Label Waste removal - Incorporating a backing paper take up roller, all the waste is accumulated in a tidy roll for easy disposal
  • No fire or slip hazard in the vicinity of the operators feet like similar machines
  • Easy to set up - within a couple of minutes a new job can be set up and running, increasing productivity immediately
  • Simple to operate - almost no skill or training is required to obtain an excellent result
  • Robust, heavy duty construction - The machine is designed for years of trouble free and maintenance free productivity.
  • No lubrication or awkward adjustments are required.
  • Fully Adjustable - Tool-less adjustment accommodating a wide range of different container sizes including extra long and large containers.
  • Printer output - For the activation of an external Thermal Printer - for printing; Use By; Batch Codes or Barcodes
  • Registration Labelling - Places labels relative to seams of cans & registration marks on containers
  • Over and Spot Labelling - detecting an existing label and adding a new label is straight forward and uncomplicated

Compact-a-pad is a portable semi automatic Labeller. It is designed to apply one or two labels to flat - parallel sided containers. It is economically priced, industrially built and provides unparalleled productivity without compromising quality. Built for ease of use and long term reliability the Compact-a-pad is as tough as it looks, made from Stainless Steel and Aluminum. It is very simple to operate and set up and unlike other semi automatic Labellers it rewinds the backing paper as you work - removing potential fire and safety hazards. All die cut labels, whether they are clear or opaque, are able to be applied by Compact-a-pad.

  • CP-SAL-P
  • CP-SAL-P
  • Bench Top
  • Electric
  • Requires Power
  • Pneumatic
  • Requires Air Compressor
  • Medium Noise