Single Head Vibratory Weigh Filler

Vibration Systems

  • Model: Ezi-Pack G
  • Note: Vibratory hammer available for sticky or clumping products
  • Item Code: VF-VSS
  • Bench top mounted (20Kgs approx)
  • Electro-Pneumatic (we can supply air compressor if required)
  • 5-15 units per minute (guide only)
  • 5gms to 1Kg fill range with standard scale
  • Adjustable fast two speed/stage fill
  • Suitable for food, cosmetic and pharmaceutical use
  • Fully speed adjustable
  • Digital control panel with weight display
  • 400kpa (60psi) pressure requirement
  • Standard 240V, 10Amp power requirement
  • Quick fill size change over
  • 25 Kg Hopper, other sizes on request
  • Suitable for jars, tubs, most bags
  • All 316 stainless steel contact parts
  • No tools required for setting adjustment
  • Sturdy low maintenance construction
  • Quick container size changeover
  • Adjustable throat depth to regulate flow
  • Removable hopper
  • Precise two speed setting via pressure regulators and analogue gauges
  • 25Kg 316 Stainless steel hopper
  • Vibrating hammer option
  • Alternate scales for special fills
  • Custom parts for special jobs

The Vibration Systems Ezi-Pack G single head Vibratory Weigh Filler is designed to sit on a flat bench top. Consisting of a vee tray mounted onto a fibreglass blade springs, base plate, hopper and a variable speed controller. The blades are set at an angle toward the rear of the tray and a pneumatic linear vibrator is attached to the underside of the vee tray providing the drive action.

The machine is capable of filling a wide range of products, from powders, granules and flakes such as herbs, spices, confectionary, tablets, coffee beans and powder, nuts, sugar and salts. Containers are manually placed onto a weigh scale, and the start button is pressed, the tray then vibrates at high speed for most of the fill, then automatically drops to a second speed fill to achieve the desired weight accurately.

The control unit enables fast set-ups and simple fine tuning of cycles through its programmable timer, digital display and pneumatic controls.

It is designed to suit small to medium scale manufacturing environments that don’t require expensive auger fillers. Unlike auger fillers the Vibratory Weigh Filler won’t mince or mash up the product because it does not have any moving contact parts that will break the product apart during the filling process.

The Vibratory Weigh Filler comes with a detachable hopper that has an adjustable throat opening and can accommodate up to 30 kgs of product, other size hoppers are also available to suit your fill requirements.

The machine is made from stainless steel and is fitted with rubber feet to eliminate transmission of vibration to the mounting surface. The frequency and amount of tray movement (stroke) can be adjusted to suit the feed rate required. This bench top machine requires set up on a level bench top, single phase power and compressed air. It is very easy to operate and just as easy to clean.

  • VF-VSS
  • Pneumatic
  • Requires Air Compressor
  • Electric
  • Requires Power
  • Low Noise